HOME PAGE
WHAT'S NEW
SHIPPING STATUS
DISCONTINUED Products
PRICE LIST, FLYER, GUIDE
PRODUCT SELECTION ASSIST
** Flat Mounts - SuperDuty
** Honda Mounts ==> NEW
** Nissan Mounts
** Toyota Mounts  ==> NEW
** Truck STAKE POCKET Mts.
** CLAMP-150: Portable
** CLAMP-250: Base+RV
** HF Shunt Coils
** Connectors & Cables
** Antenna Bases
** Antenna L Brackets
** Portable Gear ==> NEW
** Counterpoise Brackets
** Mounting Adapters
** Parts
QUANTITY DISCOUNTS
SHIPPING (WORLDWIDE)
PHOTO GALLERY
VIDEO GALLERY
PRODUCT FINISHES
TEST RESULTS
LINKS
DOWNLOADS
WARRANTY
SERVICES
FEEDBACK FORM
QUOTE REQUEST FORM
CONTACT US
SPECIAL PAYMENTS
SHOPPING CART
e-mail me



 

Antenna Mounting "L" Brackets

"Standard" Single & Dual Brackets: AMB-Bkt 1 & 2

 

Our unique, custom-made in the USA by REP Design, aluminum and stainless steel "L" bracket type antenna mounts for essentially any V/UHF mobile antenna and even large HF screwdriver/motorized antennas, depending on which model you choose. You can bolt, screw or attach these directly to your mobile, fixed base or top of mast situation, or simply bolt them to several of our clamp-on and "BKT" series specialized mobile brackets.

Several options fit these mounts, including our "Arm2" second antenna bracket, ground counterpoise "ring" brackets and SHUNT100  weatherproof adjustable HF load inductor. Multiple interchangeable antenna bases are available. Available in buffed aluminum or powder coated finishes .

Here's a list of our "standard L" mounts, that are describe in detail and can be ordered on this page:

  • Standard models - any V/UHF mobile antenna and smaller HF antennas; mobile and fixed-base uses.
    • AMB-Bkt-1:  single "L" bracket for mounting to vertical surface.
    • AMB-Bkt-2"dual L" version for mounting horizontal surface, allows tilting of antenna.


To go directly to detailed information and to order our other L mounts, please click: 

To go back to the "general" L mounts page, click L MOUNTS SUMMARY PAGE .

Not sure what you need, please CONTACT US for a speedy reply.

Read on about our two "standard" L antenna mounts; they are also ordered below.


AMB-Bkt-1: Standard "L" Mount

[Photo above: "AMB-Bkt-1" shown with three of several choices of compatible antenna bases and stainless steel hardware, in buffed aluminum (powder coat also available)]

Antenna mounting "L" bracket for V/UHF and small HF mobile antennas, and even BuddistickTM vertical antennas. Can now be ordered without any antenna base, or with our several INTERCHANGEABLE antenna bases. For mobile and fixed base use. Read on below about its specifications, types of antennas that can be used, compatible antenna bases and several options.

Specifications

  • Material of construction: 6061 aluminum.
  • Hardware: 18-8 stainless steel 3/8 inch bolts &  1/4 inch grounding bolt.
  • Finishes: Standard hand buffed aluminum. Optional powder coat finishes by special order - black, red, white, blue and clear coat. On powder coat finishes we mask off the critical areas around the holes to provide an excellent bare metal to bare metal contact for good grounding and performance.
  • Dimensions: 1/4 thick x 4x4 x 2 inches wide
  • Transmit Power: QRP, 100 watts or whatever your antenna and type of antenna base can withstand.
  • Where Used: mobile and fixed base
  • Antenna Bases:
    • ¾ inch diameter mounting hole with panel thickness ¼ inches
    • choice of interchangeable bases - see list below under Antenna Bases

Compatible Antennas

The following antennas are compatible, with the appropriate antenna base. If you have any questions, please CONTACT US  or view the INSTALLATION MANUAL .

  • small to largest V/UHF mobile antenna (6m and above)
    • amateur radio antennas
    • GMRS antennas
    • commerical band antennas 
  • HF "ham stick" type antennas 
  • HF HustlerTM and Texas Bug CatcherTM loading coil type antennas
  • OutbackerTM "clip-lead" type antennas
  • manually tuneable HF antennas such as:
    • Super Antennas MP-1
    • MFJ-1624 HF mini-BugCatcher Mobile Antenna
    • MFJ's various models of 6 Thru 40 Meter Portable Screwdriver Antennas
    • and others
  • small HF motorized / screwdriver antennas such as:
    • High Sierra "Sidekick"
    • Tarheel "Little Tarheel"  
    • Super Antennas MP-2
    • and others 
  • BuddipoleTM antennas
    • dipoles in horizontal, sloped and L configurations with our 8 inch long "VersaBase" that you can order below (requires the Versatee from Buddipole)
    • BuddistickTM vertical antennas with our 3/8x24 HD stud base
    • Visit Buddipole Antenna's web site at: http://buddipole.com .

Installation Procedures

It can be mounted to a vertical surface using the included stainless steel bolts or other screws that you would provide, such as for mounting to a wooden surface. One 3/8 included bolt is used to attach it to our compatible mounts, which allows you to tilt the antenna. For mobile and fixed base use. For installation details you may find the INSTALLATION MANUAL of interest, which can be viewed or printed in PDF format.   

TO ORDER, please scroll down to the ordering buttons after the "Options Section" below.

Product Photos (AMB-Bkt-1)

The following are just a few example photos to illustrate some of the key features and installation ideas.

PHOTO BELOW: AMB-Bkt-1 on vertically mounted CLAMP200 , with our 3/8x24 stud antenna base and SHUNT100 . The "Bkt" can be mounted to other vertical surfaces in a similar fashion.

PHOTO BELOW: AMB-Bkt-1 on horizontally mounted CLAMP200, with stude base and AMB-Arm2 second antenna bracket with NMO base and four groundplane radials.

PHOTO BELOW: AMB-Bkt-1 on BKT-NissanTrac-1  slide-in bracket, with High Sierra "Sidekick" small HF screwdriver antenna with long quick disconnect.

For additional product photos, please visit our  PHOTO GALLERY ("Product Photos" & "Customer Photos" sections).


AMB-Bkt-2: Dual "L" Bracket

[Photo above: AMB-Bkt-2 shown with our 3/8x24 antenna bases & stainless steel mounting hardware; this is one of several interchangeable antenna bases. Shown in buffed aluminum; powder coat is also available.]

Antenna mount with "dual L" brackets for V/UHF and small HF mobile antennas, and even BuddistickTM antennas. Can now be ordered without any antenna base, or with our several INTERCHANGEABLE antenna bases. For mobile and fixed base use. Read on below about its specifications, types of antennas that can be used, compatible antenna bases and several options.

Specifications

  • Material of construction: 6061 aluminum.
  • Hardware: 18-8 stainless steel 3/8 inch bolts &  1/4 inch grounding bolt.
  • Finishes: Standard hand buffed aluminum. Optional powder coat finishes by special order - black, red, white, blue and clear coat. On powder coat finishes we mask off the critical areas around the holes to provide an excellent bare metal to bare metal contact for good grounding and performance.
  • Dimensions: each "L" is 1/4 thick x 4x4 x 2 inches wide
  • Transmit Power: QRP, 100 watts or whatever your antenna and type of antenna base can withstand.
  • Where Used: mobile and fixed base
  • Antenna Bases:
    • ¾ inch diameter mounting hole with panel thickness ¼ inches
    • choice of interchangeable bases - see list below under Antenna Bases

Compatible Antennas

The following antennas are compatible, with the appropriate antenna base. If you have any questions, please CONTACT US  or view the INSTALLATION MANUAL .

  • small to largest V/UHF mobile antenna (6m and above)
    • amateur radio antennas
    • GMRS antennas
    • commerical band antennas 
  • HF "ham stick" type antennas 
  • HF HustlerTM and Texas Bug CatcherTM loading coil type antennas
  • OutbackerTM "clip-lead" type antennas
  • manually tuneable HF antennas such as:
    • Super Antennas MP-1
    • MFJ-1624 HF mini-BugCatcher Mobile Antenna
    • MFJ's various models of 6 Thru 40 Meter Portable Screwdriver Antennas
    • and others
  • small HF motorized / screwdriver antennas such as:
    • High Sierra "Sidekick"
    • Tarheel "Little Tarheel"  
    • Super Antennas MP-2
    • and others 
  • BuddipoleTM antennas
    • dipoles in horizontal, sloped and L configurations with our 8 inch long "VersaBase" that you can order below (requires the Versatee from Buddipole)
    • BuddistickTM vertical antennas with our 3/8x24 HD stud base
    • Visit Buddipole Antenna's web site at: http://buddipole.com .

Installation Procedures

It can be mounted to a horizontal surface using the included stainless steel bolt or other screw that you would provide, such as for mounting to a wooden deck railing. For mobile and fixed base use. For installation details you may find the INSTALLATION MANUAL of interest, which can be viewed or printed in PDF format.   

TO ORDER, please scroll down to the ordering buttons after the "Options Section" below.

Product Photos (AMB-Bkt-2):

The following are just a few example photos to illustrate some of the key features and installation ideas.

PHOTO BELOW: "Bkt-2" with optional AMB-Gnd-8  HF ground counterpoise ring (radials not shown).

PHOTO BELOW: "Bkt-2" with optional NMO Radial Antenna Base (135-512 MHz).

PHOTO BELOW: Close-up of the "Bkt-2" on wooden railing with stud base and AMB-Gnd-8 counterpoise ring.

PHOTO BELOW: Views of theree of our many interchangeable antenna bases. Also illustrates how the mount can be adjusted slightly for antenna mouning height.

For additional product photos, please visit our  PHOTO GALLERY ("Product Photos" & "Customer Photos" sections).


 

ANTENNA BASES & OPTIONS (Both Models 1 & 2)

The following items are compatible with the AMB-Bkt-1 (single L) and AMB-Bkt-2 (dual L).

Antenna Bases

You might also be interested in the following antenna base that will work with this item.  For more details, click on the "Antenna Bases" link, and to order any bases WITHOUT one of our mounts.. These can be ordered with one of our mounts after the photos section below for a shipping discount.

  • Antenna Bases : the following antenna bases are compatible with this mount. You will need at least one base to mount your antenna, whether it is one of ours or yours.

Options

You might also be interested in the following options that will work with this item.  For more details, click on the link for each option. These can be ordered after the photos section below.

  • Counterpoise Brackets : Connect your telescoping whips or tuned "hamstick" HF antennas to our optional "counterpoise" rings which bolt to the CLAMP150:
    • AMB-Gnd-1  : counterpoise ring made of aluminum and stainless steel hardware, with four (4) 3/8x24 couplers for screwing on up to four counterpoise whips.

    • AMB-Gnd-8  : counterpoise ring made of aluminum and stainless steel hardware, same size as the AMB-Gnd-1, except has eight (8) 3/8x24 couplers for screwing on up to eight counterpoise whips.

  • AMB-Arm2 : Second antenna arm, 13 inches long, WITH NMO base with four REMOVABLE radials for 135-512 MHz, bolts to CLAMP150 upper ground bolt.

 

 

  • CNCT-PL259-WXQD  : weatherproof quick-disconnect for your coax - unplug your coax neatly if you remove your antenna, without having the plug "dangling in the wind and weather". Use your antenna on another vehicle or fixed- base while you're not operating mobile, or use multiple antennas on one vehicle. Very unique.

  • Cables and Connectors  : check out our new listings for cables and highg-quality Amphenol PL259 connectors, "the real deal".

  • SHUNT-100 : weatherproof adjustable HF load inductor for 160-10m, which bolts directly to the CLAMP150.

.


ORDER HERE - "Standard" Models + All Options

  • Single "L" Mount: AMB-Bkt-1
  • Dual "L" Mount: AMB-Bkt-2

TO ORDER (1) select  model & finish, then (2) select antenna bases and (3) options that you may want. We offer DISCOUNTS if you order three (3) or more items (mix and match). For a FAST QUOTE fill out our QUOTE FORM . For shipping information click > SHIPPING (Worldwide) . Prices are shown below in the "pick lists".

If you're not sure what to order, please CONTACT US with the vehicle model and antenna you want to mount. We will reply quickly with a quote!

Solution Graphics

(1)  FIRST, select model (single or dual "L") & finish (buffed aluminum or powder coated finish):

(a) AMB-Bkt-1 (singel "L") 

United States Customers: Shipping $11.00, shipping each additional $5.00.

Select Finish:
Canadian Customers: Shipping $26.00, shipping each additional $7.00.
Select Finish:
International
Customers: Shipping $36.00, shipping each additional $9.00.
Select Finish:

 

(b) AMB-Bkt-2 (dual "L") 

United States Customers: Shipping $12.00, shipping each additional $5.00.

Select Finish:

Canadian Customers: Shipping $27.00, shipping each additional $8.00.

Select Finish:

International Customers: Shipping $37.00, shipping each additional $11.00.

Select Finish:

 

(2)  SECOND, select one or more antenna bases (yours or ours are required):

The following antenna bases are compatible, and INTERCHANGEABLE: Group 5 (3/8x24 Stud, AntMtg Kit, SO239, NMO, VersaBase, NMO + radials). REDUCED SHIPPING if ordered with compatible mount.

United States Customers:

Stud, AntMtgKit, SO239, NMO, VersaBase Shipping $2.00, shipping each additional $2.00 

Select antenna base(s):

NMO + radials: $55.00 + Shipping $14.00, shipping each additional $7.00


Canadian Customers:

Stud, AntMtgKit, SO239, NMO, VersaBase Shipping $3.00, shipping each additional $3.00.

Select antenna base(s):

NMO + radials: $55.00 + Shipping $30.00, shipping each additional $14.00


International Customers:

Stud, AntMtgKit, SO239, NMO, VersaBase Shipping $4.00, shipping each additional $4.00 

Select antenna base(s):

NMO + radials: $55.00 + Shipping $45.00, shipping each additional $22.00


(3)  THIRD, select options if desired:

You might also be interested in the following options that will work with this item. Click on the links for each option for details and to order them. We offer a discount if you order three (3) or more of one or multiple products. 

  • Counterpoise Brackets (AMB-Gnd-1 or 8) : Connect your telescoping whips or tuned "hamstick" HF antennas to our optional "counterpoise" rings.
  • AMB-Arm2 : Second antenna arm, 13 inches long, WITH NMO base with four REMOVABLE radials for 135-512 MHz, bolts to CLAMP150 upper ground bolt.
  • CNCT-PL259-WXQD  : weatherproof quick-disconnect for your coax - unplug your coax neatly if you remove your antenna, without having the plug "dangling in the wind and weather". Use your antenna on another vehicle or fixed- base while you're not operating mobile, or use multiple antennas on one vehicle. Very unique.
  • Cables and Connectors  : check out our new listings for cables and highg-quality Amphenol PL259 connectors, "the real deal".
  • SHUNT-100 : weatherproof adjustable HF load inductor for 160-10m, which bolts directly to the CLAMP150.

 

To go back to the "general" L mounts page, click L MOUNTS SUMMARY PAGE .


When you are done shopping:

Click "View Cart" below to complete and submit your order. You can click View Cart anywhere on our web site to get to your shopping cart. THANK YOU.


To Return to Our Home Page, click > RETURN TO HOME PAGE



QUANTITY DISCOUNTS & SPECIAL PAYMENTS:

We offer this special payments link for:

  • QUANTITY DISCOUNTS - order three (3) or more of any one or multiple products at the same time, mix and match; click.
  • CUSTOM or NEW PRODUCTS - those that are not shown on our web site.
  • SERVICES - various services that we provide besides antenna products, such as photography, technical manual/instructions preparation, web sites, etc.
  • SPECIAL SHIPMENTS - if you would like your order shipped over night or by another means (we normally use USPS Priority Mail, which ships worldwide in 2-10 days) .

This can be used by United States, Canadian and International customers.

To make a special payment, click > SPECIAL ORDERS.  For information on our quantity discount, or to submit a Quote Request, click > QUANTITY DISCOUNTS 

Thank you.



Please report any problems or errors with this web site, by clicking > CONTACT US . Thank you for reporting problems!


Major Web Page Update: 3/29/2011