Standard Antenna Bases:      $20.00 USD 

The following mobile antenna bases are the same ones that come with our "AMB Series" Antenna Mounting Bases. They are HEAVY DUTY and include mounting hardware to fit into a 3/4 inch diameter hole - are interchangeable!!

Additional Antenna Bases with SO239 jack for coax plug:  

• 3/8x24 stud mount - heaviest duty we could find and is rated by the manufacturer for well over 2,000 watts.
• NMO and SO239 - come with heavy-duty nuts and stainless steel washer(s) - something that NO ONE ELSE provides with these types of bases

Please be sure to SELECT the TYPE OF ANTENNA BASE, from the drop down list below. You can order more than one base, by selecting the first one, click "Add to Cart", then select the next base and again click "Add to Cart". You can order 1 or all three types this way, and can even order more than one at this discounted price.

** United States Customers:  Shipping 7.50; 2.00 for each additional unit

** Canadian and International Customers: Shipping based on total amount of order, for details click > CANADA & INTERNATIONAL SHIPPING.

"NMO Antenna Base with V/UHF Radial Kit": $55.00 USD

NMO Antenna Bases with four (4) ground plane radials and SO239 jack for coax plug:  This special NMO base will allow you to use your 135-512 mHz antenna with the CLAMP-200, with the AMB-Bkt-1 or AMB-Bkt-1-T antenna brackets that bolt to a vertical or horizontal CLAMP200. For horizontally mounted CLAMPs, you will also need the AMB-HMA-1 adapter. This is the SAME NMO base that comes with our AMB-Arm2 second antenna mount - minus the 13 inch second antenna arm bracket (see option 6 above for this item). This special base is provided if you want to install your V/UHF antenna (2m to 70cm) as the ONLY antenna on the CLAMP200 system. This NMO base with radials mounts into the 3/4 inch hole with provided mounting hardware that includes heavy-duty nuts (not the thin nuts that come with most SO239 connectors).

Please note that the NMO base with four radials is the same as shown in the two photos below, EXCEPT THE ALUMINUM BRACKET IN THE PHOTO IS NOT INCLUDED (photos are of the AMB-Arm2, option #6, which includes the 13 inch arm shown below).

** United States Customers:  Shipping 18.50; 5.00 for each additional unit (comes in larger box due to length of radials)

** Canadian and International Customers: Shipping based on total amount of order, for details click > CANADA & INTERNATIONAL SHIPPING.

"SHD SO239" Super Heavy-Duty Custom-Made SO-239 Antenna Mounting System: $45.00 USD

  This is custom made for our UHAM Antenna Mounts but can be used for other applications where you need an SO239 jack with an integral 3/8x24 REMOVABLE stud that fits any mounting plate that is at least 3/4 inches thick

To order, please click > SHD-SO239

To quickly view or order other products, click > RETURN TO HOME PAGE

Then click on the image of the product you are interested in

SPECIAL ORDERS:

This can be used by United States, Canadian and International customers.

For all SPECIAL shipping and payments, please click the following link to go to our "Special Orders" system: click > SPECIAL ORDERS. 

Thank you.

Please report any problems or errors with this web site, by clicking > CONTACT . Thank you for reporting any problems!

REP Design LLC, Southington, CT , United States        

+1 (860) 426-1894    

www.repDesign.us